| Series No. |
General Desc. |
Specifications |
Applications |
Temp Range |
| Heat Shrinkable Tubings |
| 202 |
PVC |
AMS-DTL-23053/2 CL. 2 |
Product features low shrink temperature, high flame
retardancy, and resistance to most chemicals, oils, moisture,
fungus, and high UV resistance. |
-30º C to 105º C |
| 204 |
Neoprene® |
AMS-DTL-23053/1 CL. 1 & 2; MIL-R-46846 Typ. 1 CL.
1. |
Provides fluid and solvent resistance including aviation
fuels, hydraulic fluids, and lubricating oils. Remains
flexible at low temperatures. Excellent abrasion protection
and strain relief. |
-75º C to 120º C |
| 205 |
Dual wall, adhesive-lined polyolefin, 2:1 and 3:1 |
AMS-DTL-23053/4 CL. 2 & 3 |
Meltable adhesive which flows when heated. Used to seal
and protect a wide variety of electrical applications
including breakouts, connectors to cable transitions,
strain relief and wire splices. |
-55º C to 110º C |
| 206 |
Semi-rigid, adhesive-lined polyolefin |
AMS-DTL-23053/4 CL. 1 |
Insulation and environmental protection in applications
requiring superior strain relief and abrasion resistance. |
-55º C to 110º C |
| 207 |
Flexible polyolefin, 2:1, 3:1, 4:1 and VW-1 |
AMS-DTL-23053/5 CL. 1,2,& 3 |
Used for a wide range of applications requiring heat-resistance,
including insulation for electric and electronic devices,
strain relief, color coding, and wire marking. |
-55º C to 135º C |
| 208 |
Semi-rigid polyolefin |
AMS-DTL-23053/6; AMS 3638 & 3639 |
Automatic feed equipment and other applications requiring
strain relief and exceptional mechanical strength. |
-55º C to 135º C |
| 209 |
Kynar® |
AMS-DTL-23053/8 |
Provides outstanding abrasion and cut-through resistance.
Protects wires, solder joints, terminals, connections
and components from most industrial fuels, chemicals,
and solvents. |
-55º C to 175º C |
| 210 |
PTFE Teflon®; 2:1 standard wall, thin wall and light
wall and 4:1 |
AMS-DTL-23053/12; AMS 3585, 3586 |
Applications in extreme electrical, thermal and chemical
environments. Very lubricious, chemically resistant and
inert. Excellent dielectric insulating properties |
-75º C to 260º C |
| 211 |
FEP Teflon® 1.3:1 and 1.6:1 |
AMS-DTL-23053/11 |
Applications similar to PTFE. FEP is more translucent
than PTFE and will shrink at a lower temperature. |
-75º C to 200º C |
| 212 |
Viton® |
AMS-DTL-23053/13; MIL-R-46846, Type 3 CL. 1 |
Severe chemical and thermal environments, military /
aerospace applications including electronic and fluid
transport systems. |
-55º C to 200º C |
| Extruded Tubings |
| 101 |
Polyethylene - LLDPE and HDPE |
|
Well suited for pneumatic controls, instrumentation
and hydraulic applications. Exceptional stability, long
life and resistance to corrosion and environmental chemicals
enhance system reliability. |
Max.140º F |
| 102 |
Low temperature vinyl - 7444 & 631 grades |
M IL-I-7444 Type 1 & 3; MIL-I-22076. MIL-I-631 Gr.
A & B; ASTM D922 |
Its low temperature characteristics make it useful in
wiring harness jackets, electrical harnesses for airborne
equipment, and snow machines. |
7444: -70º C to 85º C
631: -55º C to 90º C |
| 103 |
Thin wall PVC - Lead Free MIL-I-631 Gr C. |
Flexible with a high dielectric strength. Resistant
to heat, abrasion and most chemicals, oils and acids.
VW-1 rated. |
-30º C to 105º C |
| 106 |
FEP |
ASTM D 2116 |
Applications similar to PTFE. FEP is more translucent
than PTFE. |
-75º C to 200º C |
| 108 |
PTFE Teflon® |
ASTM D 3295; AMS 3653, 3655; MIL-I-22129 |
Applications in extreme electrical, thermal and chemical
environments. Very lubricious, chemically resistant and
inert. Excellent dielectric insulating properties |
-75º C to 260º C |
| 112 |
Nylon Type 6, 6/6, and 11 |
|
Applications requiring good abrasion resistance, stiffness
and strength at high temperatures which include hydraulic
hoses, robotics and vacuum, fuel, vapor, air and brake
lines. |
Max. 212º F |
| Fiberglass Sleeving |
| 104 |
Vinyl coated fiberglass |
Class 130º C, MIL-I-3190/2, ASTM D372 |
Supplementary insulation on motor, transformer, generator
and resistor leads. Also used in radio, TV, and electronic
circuits. |
-25° C to 130° C |
| 105 |
Acrylic coated fiberglass |
Class 155º C; MIL-I-3190/3; ASTM D372 |
Motor lead outs and crossovers, dry and oil filled transformers,
welding equipment, radio and TV circuitry |
-25° C to 155° C |
| 107 |
Silicone coated fiberglass |
Class 200º C; MIL-3190/6; ASTM D372 |
Protective coverings for wiring harnesses, aerospace
wiring leads, appliances, high voltage transformers, high
temperature |
-75° C to 200° C |
| 109 |
Saturated & heat treated fiberglass |
Heating appliances, lighting fixtures where additional
mechanical protection is required and space factor insulation
is sufficient. Will withstand use temperature as high
as 1200º F. |
-25° C to 240° C |
| Expandable Sleevings |
| 111 |
Expandable sleeving available in PET, Halar,
Teflon, Nylon, and more. |
General bundling, routing, and protection in office,
commercial and industrial applications. Wide variety of
colors for coding available. |
PET -75ºC to 125 ºC ; Halar -75ºC to
150º C; Teflon -70º C to 280º C |
