| |
| |
 |
|
| |
|
| |
|
|
| |
|
| |
|
|
| |
|
| |
|
|
| |
|
| |
|
|
| |
|
| |
|
|
| |
|
| |
Insulation Plastics, Inc.
P.O. Box 8068
Hermitage, TN. 37076
Phone 615-889-8577
Fax 615-889-8533
Visa & MC accepted |
| |
|
| |
| |
Specialty Products |
|
| |
|
|
| |
|
|
| |
|
|
| |
Convoluted
Tubing |
|
|
| |
|
|
| |
Plastic convoluted tubing is a corrugated tube
used to provide protection to a wire harness or any other
product that may be subject to abnormal conditions, such as:
- Continuous abrasion and vibrational wear
- Puncturing
- Water, snow, ice or salt
- UV Rays.
|
|
| |
Corrugated tubing is used in many industries
such as Automotive, Automotive aftermarket, Computer/electronics,
Emergency Vehicles, Farm Agricultural, Heavy Truck, Marine,
Recreation Vehicles, Telecommunications, Bus, Construction
and specialty markets.
You will also hear convoluted tubing referred to by several
other names. Following are some of the most common names used
for this product:
- Corrugated tubing
- Wire conduit
- Convoluted loom
- Loom
- Split loom
- Ribbed tubing
- Flex tubing
|
|
| |
Convoluted tubing is available in a wide range
of materials in both slit and solid tubing forms. Materials
include; polyester, polypropylene, polyethylene, flame retardant
polypropylene, flame retardant polyethylene, nylon, PTFE, and
FEP |
|
| |
|
|
| |
Layflat Heat
Shrink Tubing |
|
|
| |
|
|
| |
PVC A thin wall, semi-rigid,
low cost material made of PVC that offers good electrical
and mechanical characteristics. Layflat PVC is available in
widths from 13.5 mm to 203mm with wall thickness from .002"
to .012". Layflat PVC is commonly used for battery packs,
tamper proof packaging for food industry, and miscellaneous
product packaging. This product can be printed on and can
be cut to your specific requirements. Many colors available,
please contact us for additional
information.
Other materials available in a layflat include PET and FEP.
|
|
| |
|
|
| |
|
|
| |
Extruded Rubber
Tubing |
|
|
| |
|
|
| |
Insulation Plastics can provide rubber tubing
extruded to size and cut to length by various methods depending
on tolerances required. High precision tolerance parts are mandrel-cured,
the O.D. ground to size and lathe-cut to precise length. Coarser
tolerances may be simple extrusion, high-speed or guillotine
cut. We can provide a variety of materials including, but not
limited to: EPDM, Neoprene, silicone, and Viton. Feel free to
contact us to discuss your specific
requirements. |
|
| |
|
|
| |
|
|
| |
|
